Gravitrax infinity tiles variations
Description
* **THE INNER RING IS NOT MISSING** read the print instructions below. * DISCLAIMER: I strongly recommend buying the original Gravitrax sets. I'm only making parts that extend the great original gameplay as they cannot be found in the original set. They either add a new possibility or simplify/change/complete an existing one. Those tiles are not copies of the existing tiles from the great Gravitrax game, they are themed around the "infinity" 8 shapes. There might be ideal where you need to slow things down, thanks to the sharp angles, or some of them might just do what you were looking for in a more... twisted way. And of course, some are crazy. Pick whichever you like ;-) This is part of a bigger (still growing) collection of tiles (https://www.thingiverse.com/thing:4538769) The bottom hex connector is part of the stl. Once printed, you extract it, turn it 30°, and clip it. Add some glue if the binding is not tight enough to your taste. IMPORTANT: I was very careful about the measurements... I recommend tuning your printer well before printing this. And to have a look at my print settings. Else you may encounter issues with the new fixation. I only wish you get the best experience!
Statistics
Likes
0
Downloads
0