Smart cable tie
Description
Hi guys, let me introduce you to my Smart cable tie. Why did i name it smart you might ask? Here's why: - prints under 10 minutes, very little filament used - very simple reliable design - reusable - no TPU needed, PLA or PETG can be used - couldn't be easier to print, prints flat on the bed, no supports or whatever needed - hangable - excessive length can be tucked under dedicated slit - 10 sizes available - you can distinguish your cable types by color of the tie - say black for USB-C cables, white for Micro-USB cables and so on ** Printing instructions ** No specific instructions apart from 0,2 mm layer height and 0.3mm first layer height. ** Usage ** Usage couldn't be simpler. I recommend to take the print off while it's hot so you can bend it a little while it's pliable. Take cable of your choice, wrap the tie around, put one end through the hole and pull both ends of tie apart. If you have excessive length it can be tucked in the dedicated slit so nothing sticks out. Generally the 50-55 mm of length should be optimal for your needs. Now you can store the cable or hang it by 4 mm (diameter) hole. To untie simply reverse the process. ** Files ** If 10 different sizes aren't enough for you, I attached parametric model in ** .f3d ** (Fusion 360) file and by changing parameters “width”, “length”, “tooth_width” and number of teeth in sketch you can easily adjust to your needs. As always ** .stl, .3mf and some .step and .obj files are available here: ** ** https://www.printables.com/model/178410-smart-cable-tie ** Cheers! Luke
Statistics
Likes
0
Downloads
0