Lightweight DualFanShroud for Micro Swiss DD Extruder
Description
This is a remix/remodel of https://www.printables.com/model/124176-micro-swiss-direct-drive-hotend-fan. Had some troubles printing the original and also wanted to make some changes. Changed thickness of the walls of the fanducts, widened the ducts for hopefully better airflow. Changed so the flowchanger for the hotend fan is seperate and screwed on to the fan. The CRtouch holder is now screwed directly to the MS backplate(probably gonna make it more compact later. Its my first time modeling a fanshroud and is pretty new to 3D printing so I would appreciate feedback if you have some. This shroud is made for 3 40mm fans and a CRTouch/BLtouch(I think BLtouch shoud fit also). You will need M3 socket cap screws. Think you want to use petg for backplate and Hotendfanduct. Whats needed: 2 M3 socket cap screws for the fanducts 12 M3 screws for the fans 4 M3 threaded inserts for the Backplate Supports are only needed on the CRTouch holder Probe offsets are : Xoffset: -61,166, Yoffset: -9.96
Statistics
Likes
0
Downloads
0