ncase m1 sfxl psu holder
Description
Hello, This is a support to allow a sfxl psu to be held at the top of the ncase m1. There are alot of compremises to using this as the power cable now has to come out of the top of the case and for that you will have to hack a hole in the top. I made a 3d place to go around the hole to tidy things up. You also have to put a threaded screw through the front of the case to assist in holding the psu in place. But once done you can now install a far superior sflx psu in a mcase, which run cooler and with better protection built in, but also a full length graphics card too. Some supports will need to be added too when printing.
Statistics
Likes
0
Downloads
0