VORON M4 for Anycubic i3 Mega/Mega S
Description
I have modified the Voron M4 design for direct mounting on the Anycubic i3 Mega and i3 Mega S. For this, the motor plate and end plate were changed. In addition, the retaining plate was added. This allows direct mounting of the Voron M4 to the original place of the extruder. For a reproduction, the non-mirrored parts must be printed from: https://vorondesign.com/voron_m4. The parts "motor_plate.stl" and "end_plate.stl" are replaced by my parts. Additionally, the "retaining_plate.stl" has to be printed. Besides the parts linked on the Voron website for which I used the following set: [Voron M4 kit](https://alitems.site/g/1e8d114494fb47c1fd5416525dc3e8/?ulp=https%3A%2F%2Ffr.aliexpress.com%2Fitem%2F1005003607394515.html%3Fspm%3Da2g0o.order_list.0.0.21ef5c5fM4SeoS%26gatewayAdapt%3Dglo2fra) you need three M3 threaded inserts and three M3x20 Thumb screw: **1)** 3 x M3 (5mm x 6mm) [Threaded Inserts](https://alitems.site/g/1e8d114494fb47c1fd5416525dc3e8/?ulp=https%3A%2F%2Fde.aliexpress.com%2Fitem%2F1005003644472436.html%3Fspm%3Da2g0o.productlist.0.0.1be65159KqRoDK%26algo_pvid%3D99e4f3f6-0476-49b9-ba99-f172e41c4619%26algo_exp_id%3D99e4f3f6-0476-49b9-ba99-f172e41c4619-12%26pdp_ext_f%3D%257B%2522sku_id%2522%253A%252212000026628466227%2522%257D%26pdp_npi%3D1%2540dis%257CEUR%257C%257C3.77%257C%257C%257C%257C%257C%25402100bde316509984568553423e85e9%257C12000026628466227%257Csea) **2)** 3 x M3x20 [Thumb screw](https://alitems.site/g/1e8d114494fb47c1fd5416525dc3e8/?ulp=https%3A%2F%2Ffr.aliexpress.com%2Fitem%2F4000017334207.html%3Fspm%3Da2g0o.productlist.0.0.5b3462e7tTO9fd%26algo_pvid%3D07a5bf35-4767-408a-a65f-402258a3502f%26algo_exp_id%3D07a5bf35-4767-408a-a65f-402258a3502f-10%26pdp_ext_f%3D%257B%2522sku_id%2522%253A%252210000000040905832%2522%257D%26pdp_npi%3D1%2540dis%257CEUR%257C%257C2.39%257C%257C%257C%257C%257C%25402100bb5116509980794927595e7a18%257C10000000040905832%257Csea) **If you like my work, you are welcome donate me a coffee =D**
Statistics
Likes
0
Downloads
0