Filament Cutter (45 Degrees)
Description
##Filament Cutter (45 Degrees) **I first uploaded this filament cutter to PrusaPrinters (Printables.com) at the end of October 2021. (Link: https://www.printables.com/model/84172)** This filament cutter cuts filament with a diameter of 1.75 mm at a 45 degree angle. The 3D model of the cutter was created with Fusion 360. Printing time is less than 50 minutes and assembly takes 1-2 minutes. The following materials are needed to assemble the (original) **M2.5 version**: - 2x M2.5 hexagon nuts - 2x M2.5 cylinder head screws (length: approx. 5 mm) - 2x M2.5 washer (outer diameter: 5-6 mm) - Snap blade (blade width: 9 mm, 3 parts/segments) For the assembly of the (new) **M3 version**, the following materials are needed: - 2x M3 cylinder head screws (length: approx. 4 mm) - Snap blade (blade width: 9 mm, 3 parts/segments) ####Tips: - If you print the filament cutter with supports, then the supports (in the cutting slot) can be loosened and removed very well and easily with the cutting blade when assembled. - For left-handers, a mirrored version would probably be a bit more advantageous. A mirroring of the stl file (along the x axis) can be realized very easily in the slicer (e.g. PrusaSlicer) **I am no longer very active on Thingiverse. I will only publish selected models here. You can find all my models on Printables.com instead. Link: https://www.printables.com/social/62991-philipphee/models**
Statistics
Likes
0
Downloads
0