TAMIYA GRASSHOPPER : Trailing Arm Conversion Kit
Description
Initial Upload (22.05.01) Gearbox and Trailing Arm kit to replace stock rigid gearbox of tamiya grasshopper. Required parts to buy to make as shown in my videos - 1/16 scale damper, 70mm long, small bore (I used damper from RC4WD) - 540 motor and pinion gear - Alloy drive axle set for TT01/02 - Φ5mm, 0.1mm thick shim (requires 4) - few 3mm bolt and nuts, if you don't have any Since the TT01/02 axle is not as long as stock, may need extension nut to use stock rear wheels. Or you can print the wheels from this download, they are designed to be used for shorter drive axles. Reuses all the gears except the diff gear, you need to print it. 1 stock drive axle is reused as the main axle for connecting arms and gearbox Watch my build video for detail instructions https://youtu.be/gb84akmsg0Q And test run videos https://youtu.be/NqzF8jUsfk0
Statistics
Likes
0
Downloads
0