Anet A8 Plus Y rails profile adapter
Description
When I started to put my entire printer on rails with the BLV mod project, I ran into the problem of attaching the 2020 profile for the Y axis. There was also a problem with the endstop. I decided to order a 450 mm profile, so it was necessary to make adapters for them. I decided to make them more reliable than other solutions. I had to cut a thread in the profile for the screw by 6 mm. I used M6x20 screws to tighten the parts. For fastening to the profile, M5x10 bolts with T-nuts are used.
Statistics
Likes
0
Downloads
0