Raspberry Pi 4 IceTower Case with Geekworm X857
Description
Since I was looking for a suitable case for my IceTower and the Geekworm X857 and take this into my own hands without further ado. This is a little remix to my previous case for the IceTwoer. After the basic case is printed, the Geekworm adapter an fan are installed in the case differently than in the descriptions. - First, the first four spacers M/F are screwed directly into the holes provided by the case. - Befor mounting the X857 take four M2,5 screws and mount them on the next four spacer M/F - Then fix the Geekworm X857 with the prepared spacer M/F will be fixed (don't forget the SSD). - After that mount the Raspberry Pi 4 with the last four spacer M/F. - The fan is mounted on the Raspberry Pi, which is then fixed to the Pi with the screws. The complete assembly is in the pictures. After that mechanicaly everything is connected, connect the fan to the power supply of the Raspberry Pi and close the case with the two side parts and eight M3 screws. The highlight of the case is that this can be perfectly hung on the wall through the matching openings.
Statistics
Likes
0
Downloads
0