Raspberry Pi 4 IceTower (Flat) Case
Description
Since I was looking for a suitable case for my IceTower Flat, I take this into my own hands without further ado. This is a little remix to my previous case for the IceTwoer. After the basic case is printed, the Geekworm adapter an fan is installed in the case differently than in the description. - First, the first four spacers M/F are screwed directly into the holes provided by the case. - After that mount the Raspberry Pi 4 with the last four spacer M/F. - The fan is mounted on the Raspberry Pi, which is then fixed to the Pi with the screws. The complete assembly is in the pictures. After that mechanicaly everything is connected, connect the fan to the power supply of the Raspberry Pi and close the case with the two side parts and eight M3 screws. In this case, there is no mounting on the wall possible, instead there are five hole in the top of the case to get a better airflow.
Statistics
Likes
0
Downloads
0