PKD-2019 Blade Runner Blaster (working Hammer)
Description
This is my remix of AndersPF take on the 1982 Blade Runner Blaster. You will need to modify some of AndersPF original parts as well as some additional hardware to make this Hammer and Trigger assembly actually work. Steps needed: - Print above listed files - Drill Reciever for the mounting pin (d = 2mm) - Drill inner Grip Frame in the middle crossbar section for the Springrod (d = 5mm) Extra parts needed: - Spring (5mm inner Diameter; 50mm long) - Pin (d = 2mm; l = 7mm) -> Nail recommended - Pin (d = 2mm; l = 13mm) or Grub Screw as a Hammer rotational point Make sure to drill the Receiver as exact as possible, otherwise the functionality may be compromised. I used this picture as a reference. You can use it as an orientation for the Springrod hole in the Grip frame as well. http://pds.exblog.jp/pds/1/201005/19/42/a0077842_1018477.jpg It should measure 7mm up and in from the corner of the Receiver for the Hammer rotation point.
Statistics
Likes
0
Downloads
0