Modular Arcade Fightstick Hitbox Mixbox
Description
# Modular Arcade Fightstick Hitbox MixboxModular Arcade Fightstick Hitbox Mixbox - WHATEVERYOUWANTIT-box **Whateveryouwantit-box** is a remix (or recreation rather) of [cmanoncom's Arcade Fightstick](https://www.thingiverse.com/thing:2439344/comments "cmanoncom's Arcade Fightstick"), redesigned with customizability in mind. Unlike the soruce, it does not require plexiglass and is a fully 3D-printable case. ## Features / Differences to original - **Button holes everywhere**: more button holes on the sides of the case - **Left and Right shells connected** together with M6 bolts and nuts (x6 for shell alone) - **Independant interchangable top covers**: - **Sanwa JLF mount** compatible cover for your JLF action - **Hitbox**(-ish) **style cover** if touching shafts is not your thing ;) - **Mixbox style cover** if you miss your WASD - **Noir**(-ish) **button layout**, compatible with **30mm SANWA** (knockoffs) buttons - Compatible with [3D printed cherry arcade buttons](https://www.thingiverse.com/thing:5375143 "3D printed cherry arcade buttons") - **Leftie-friendly**: just flip top cover over and put it on the other side! - Endless possibilities to make your own top cover! - **Covers** and **30-to-24mm Adapter** for unused holes, if your function buttons happen to be 24mm # Additional things needed for assembly - **Total 14x M6 bolts 30-40mm length and nuts** - Mine bolts were **40mm in length**, but you only need **~30mm** (I just couldn't find those) - Mine nuts (*giggity*) had rubber stoppers, but the usual ones will do fine too - Alternatively you could find car interior plastic rivets and replace cover holding bolts with them (see pictures) [](https://restagraf.com/en/la-fixatique/12326-plastic-rivet-o-65-67-mm-wheel-housing-cover.html "ASDF") *Mine were* [restagraf 12326](https://restagraf.com/en/la-fixatique/12326-plastic-rivet-o-65-67-mm-wheel-housing-cover.html "restagraf 12326") *but anything of appropriate size will do!* # Print settings ## General * Used fillament: PLA & PET-G (I ran out of one in between top covers :] ) * Layer height: 0.15 mm * Infill: 25% * Pattern: Hexagon * Raft: YES * Shells: at least 3 ## Housing Shells * Orientation: Face UP * Supports: Linear Auto (55deg overhang) ## Top Covers * Orientation: Face UP * Supports: No ## Inserts / Adapters * Infill: 15% * Orientation: Face DOWN * Supports: No
Statistics
Likes
0
Downloads
0