Desk Pencil/Pen Holder With TFT Touchscreen
Description
https://youtu.be/HtqmaUxh5cw I made this desk organizer to hold some pens, brushes, etc. I wanted to make it a clock too so I added a face to hold the Adafruit Featherwing TFT, with is also a touchscreen. I printed each Face part face down, then glued them together after painting. I wanted to use gold colored filament but all I had was black. The Ball piece was printed with transparent TPU, but a harder Filament could be used too, as long as the NeoPixel behind it can shine through. I cut a piece of the non-display faces to let a USB cable connect to the Feather board. Onle the display-face is printed with support structure The Rim part is glued to the Cup part, which then fits right on top of the assembled sides. I didn't glue the top to the sides so that I can separate them to access the Feather RP2040. Parts: - TFT FeatherWing - 2.4" https://www.adafruit.com/product/3315 - Adafruit Feather RP2040 https://www.adafruit.com/product/4884 - NeoPixel https://www.adafruit.com/product/1612
Statistics
Likes
0
Downloads
0