BTT 2 in 1 out mount revised - A10M
Description
This is a very basic remix of the XCR3d A10m mount by kpoch. I cut a hole in the center of it to help with airflow when using 30mm stock fans from geeetech or the one that comes with the BTT hotend. This should work with either the switching or mixing 2 in 1 out hotends by BigTreeTech. This mount should be screwed onto the hotend opposite the fan, then the mount should be screwed directly to the factory fan shroud of the A10M or A20M.
Statistics
Likes
0
Downloads
0