TX16S FPV-watch and CRSF-antenna holder
Description
Made some things to fit my needs. Can't take much design credit. Mostly mashed up a handful of other designs I found on here - full credit to those due, but I can't remember where I got each bit from anymore so here's the collection of all of them. Thanks to those that came first. https://www.thingiverse.com/abertheham/collections/transmitter I mostly just wanted to hold the Ethix FPV monitor *and* make my CRSF antenna semi-permanent - at least enough that it would be out of the way so that I didn't need to take it off every time I put the radio in my bag. This is what I came up with. I left the native/internal 2.4GHz MPM antenna attached and just glued it up on the inside of the case near the top. The range sucked to begin with so I doubt it makes much difference, but to be honest I rarely use anything other than the crossfire these days. Will probably be making some revisions to accommodate the HappyModel ES24TX Pro antenna (would probably work with other ELRS modules/antennas too but hard to say) in the not too distant future. Probably just going to be a small change to the part that holds the antenna to the Tx plate, but we'll see. I haven't made the leap over to ELRS just yet but will probably do so in the next month or two. If anyone is interested, let me know in the comments and I'll share those files when I get around to making them... Cheers!
Statistics
Likes
0
Downloads
0