Desktop Hydroponic System: Rain Irrigation
Description
This system is a remix and redesign of Matou_Makes fill and drain desktop hydroponic system. This version if my desktop hydroponic system took the beautiful design that Matou_Makes created, and I modified to fit my preferred rain irrigation water system. No epoxy was used in my system. After 24 hours with a full water tank sitting on a paper towel there was no visible water leakage. Results may differ with different filament. This system was printed on my Neptune Elegoo FDM printer using Overture White PETG filament. Layer Height: 0.2 mm Wall Thickness: 1.6 mm Nozzle Temp: 245 F Bed Temp: 86 F Infill: 20% Speed: 40 mm/s Initial Layer Print Speed: 8.0 mm/s Fan Speed: 45% Supports: No supports are needed for: Filter, Water Reservoir, Net Pot Tray, Gutter, Water pump adapter. Tree supports for: Irrigation Line (orient so that left and right tubing are face down on the build plate. Custom Supports for: Planter box (place supports on water drain area) If you would like to buy the same material I have, you can purchase them here: Water pump: songlong Submersible Pump 200GPH... https://www.amazon.com/dp/B08K2VF8FC?ref=ppx_pop_mob_ap_share Net Pots: 2 inch Net Pots Cups Heavy Duty... https://www.amazon.com/dp/B073WJFHQH?ref=ppx_pop_mob_ap_share Emitter: Raindrip A184010B 10-Count Full Circle Rotary Adjustable Sprinkler, Black https://www.amazon.com/dp/B000A1A8WE/ref=cm_sw_r_cp_api_i_188VA66P06FZG7ND1D27 Irrigation Tubing: Raindrip 100050211 Black 016010T 1/4-Inch by 100-Feet Tubing, 1 https://www.amazon.com/dp/B0007WJIJU/ref=cm_sw_r_cp_api_i_PCE9X0J72EEDDM3C1KYR
Statistics
Likes
0
Downloads
0