Microphone from an array of electret microphones 4015
Description
20 microphones 4015, connected in series (4*1.5 mm, https://aliexpress.com/item/1035955071.html ). The first measurements showed less distortion than that of the 25 mm membrane. Absolutely no colored sound. The flat panel gives directivity at high frequencies. The output voltage is several volts, if we talk directly into it. Microphones need to be selected with a multimeter in the "diode" mode so that they are used with a close voltage drop in one device. By selecting J1 (if necessary, a resistor of tens of ohms in the source circuit) and R2, you need to get about 30 volts at the XLR 2 output. By selecting R1, you can find a point with zero distortion of microphones, it is only for this. XLR3 is used as a power source for microphones. A chain of microphones, each plus up, connects between MIC1+ and MIC20-.
Statistics
Likes
0
Downloads
0