VKD15 Dual 5015 Blower for Kobra Max | Vyper | Ender3 /3 Pro
Description
This blower shroud was designed to fit the Kobra max with dual 5015 fans and the factory heat sink fan. Note: The Kobra Max and the Vyper use one fan header for both part cooling fans so you will need to splice the two 5015 together. The led on the Kobra can be cut and run through the hole directly under the heat sink fan, or hot glued or super glued in the ridge in front of that hole. I chose to glue mine as shown in the assembled image. All holes use m3 bolts and nuts m3x18 or m3x20 both work fine. Zip ties also work great for a quick mounting solution if you don't have m3 bolts or want to be able to swap parts faster. All Kobra and Vyper parts are the same and the are labeled VKD15. All Ender parts are labeled e15. Enjoy!
Statistics
Likes
0
Downloads
0