Honeycomb Ventilation Grille (150x100, 200x60)
Description
Honeycomb Grilles ==================== These are a couple of honeycomb ventilation grilles I designed to create some airflow in the electrics cupboard of my van. They are designed to fit a square hole of size 150 x 100 mm or 200 x 60 mm and are fixed in place with 4 3.5 mm wood screws. Print settings ==================== Flip the model so that the larger part touches the bed. You won't need supports and the parts are a straight fit after print. Depending on the use (e.g. for outdoor use or inside a car) you should consider using PETG. I printed them in PLA+ and they are holding up well after a few months. Not the right dimension? ==================== **Got your back, brah!** You will find the Solidworks designs in the Files. Feel free to modify as needed. Don't have Solidworks? Shoot me a message and **I can modify it as needed and provide you with the STL.** Find the design useful? ==================== Consider offering me a beer. Beer fuels creativity and creativity creates good STLs :-)
Statistics
Likes
0
Downloads
0