ADXL343 Mount for Micro Swiss NG Extruder
Description
Excuse the poor photos! ADXL343 (Cheaper than 345) mount for the new MicroSwiss NG extruder. A little overkill with heated inserts but hold solid to get an accurate reading. These are the brass inserts I used: https://www.amazon.co.uk/gp/product/B09MCWTGLZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 You'll need: 3x brass inserts 2x M3x4mm bolts 1x M3x12 bolt Remove the top right screw holding the fan shroud in place, use the 12mm bolt through the shroud through the mount and into the the 343 mount. Can be left on the printer permanently if you want. Enjoy
Statistics
Likes
0
Downloads
0