Filament dry box kit
Description
This is the parts I designed or remixed for my dry box. My current setting is 3 spools + one silica spool per box, but is can easily be adapted to basically any size. Innovation compared to other dry box accessories: -Pass through integrate a sponge to avoid dust, act as a seal (no need of pneufit) and could be used as an oiler -Silica is stored in a rotative spool so the silica beads can be rotated to make the most out of them. They last longer than a spool of filament, so just change them/regenerate them at each spool change. -Hygrometer holder adapted to most domestic hygrometers, uses a "floating" attachment method, to avoid contact with the bottom of the side of the container = more accurate measurement. **"Non printable Hardware" needed:** - Stainless threaded rod M8 cut to appropriate length for your box - 2 M8 wing nuts - For each spool : two cheap ball bearing of the 608 type (bought them in bulk on amazon - 0.65€/ unit) for the spool holder - Each pass through (2 per spool) : Four 3mm screws and nuts with conical head (mine are 3*16, but are too long) - For each hygrometer: two 3mm*16mm self-taping screws - A piece of sponge, foam... I used the black foam of the packaging of an Ender3 :) **Print List** -For each box : - One hygrometer support, - 2 treaded rod supports and their backing plates, - One silica spool -For each spool added - 2 spool holders and 2 clips - One pass through + backing plate - One storage pass through (optional) If you like this kit, please like and comment, this pushes me to post more or my designs I am reactive to (realistic) improvement/modifications requests - please post them in the comments bellow. Have fun Re-use / Sources: -Pass through exterior portion is from : https://www.thingiverse.com/thing:961881 -Spool holder and clip for 18-56mm spools is from : https://www.thingiverse.com/thing:767317
Statistics
Likes
0
Downloads
0