Paddle Shifters for SimRacing
Description
Low-profile simracing shifters, designed for very clicky action and ease of servicing. You can open these up, remove the lever, replace the switch, replace the magnets, etc. without removing them from the wheel. Revised switch positioning reduces mechanical latency - you get a shift as soon as the paddle lifts off the magnet, not at the end of its throw like other designs. Note that the switches must be wired to normally-closed open instead of normally-open - just use the NC terminal instead of NO on each switch. Printed in ABS at 40% infill, but PLA is probably fine.
Statistics
Likes
0
Downloads
0