Fuel Injector Flush tool 12mm ID
Description
This is an untested print. It is to connect a slim style (12mm) automobile fuel injector (eg: Toyota 2AZ-FE) to an aerosol can straw with 2.1mm hole (eg: Carb or Fuel Injection cleaner) I am led to believe the OD on the Toyota O-ring is 11.7mm before installation. The adapter ID is 12mm tapering to 11mm with a chamfer. The tester_a.stl has an additional chamfer on the straw side. All risk taken by user, I merely modeled this to attempt to join these two. Wear your personal protective equipment. You will need to power your injectors to hold them open when you do this. Do not burn out your injector coils by keeping them powered continually.
Statistics
Likes
0
Downloads
0