Mean Well PSU Dual-Stand (LRS350 + LRS35)
Description
This is a PSU dual stand for 2 MeanWell LRS power supplies which uses the power socket (IEC) from the Creality Ender 3 original power supply. ### fits: * MeanWell LRS-350-24 (and others with the same measurements) * MeanWell LRS-35-12 (and others with the same measurements) ### notes: * threaded inserts (M3) * holes could be require pre-drilling (holes have 4.2mm diameter - better safe than sorry) * 2mm additional depth for excess plastic ### required materials: * threaded inserts * 2x M3 8x5 (power socket) * 1x M3 6x5 (LRS-35 mounting hole / inner wall) * screws * 2x M3x8 (power socket) * 2x M3x8 LRS-35 mounting * 2x M4x8 LRS-350 mounting * 2x M5 stand mounting (variable length) ### additional notes: Provided pictures are from the first revision with higher tolerance for PSU, reduced it from 0.8 to 0.4mm in both directions. Additionally, I changed the side mounting hole diameter for LRS35 from M4 to M3 (error in my variables). Due to the long print time, I stick with it.
Statistics
Likes
0
Downloads
0