BMW ZF5 Shift Pin Punch Tray/Box with Double Latches
Description
This is a BMW ZF5 Shift Pin Punch Tray/Box with Double Latches. This works with the commercially available metal punches from Thayer Motorsports and is a remix of https://www.printables.com/model/209302-bmw-zf5-shift-pin-punch-tray by rfourb. It is printed as separate parts that are printed in orientations chosen to maximize strength and then snapped together. The box halves require moderate infill (10%-20%) and can be printed with no supports, but I prefer to paint on supports under the flat sections on the hinge brackets, the latch hoops, and the latch catches. I printed with 0.16 layer height in PLA. I have printed printed similar boxes in PETG and with mixed parts in PLA, PETG, and SPLA. Assembly instructions: 1) Snap the hinges into the box bottom's hinge hoop making sure that the hinge tabs are fully engaged and locked in place. 2) Flip the hinge tabs to the up position and place the box lid over the box bottom with the hinge hoops over the hinge tabs, press the box halves together until the hinge tabs fully snap into the hinge hoops and lock in place. 3) Push the tab of the latches through the latch hoops on the box lid until the latch tabs fully lock in place.
Statistics
Likes
0
Downloads
0