Bat Shirt Cuff
Description
An easy to print bat shirt cuff (staring at you). How to: - Print the bat and the holder bar. - Calibrate the eye holes with a 1.7 mm drill and insert two pieces of white 1.75 mm filament. You may need pliers to insert the filament in a turning motion. At 1.7 mm bore the filament should stay in place by pure friction. - Calibrate the hole in the holder bar with a drill to something between 1.8 and 2 mm (depending on your available drills). - Calibrate the holes in the fork with a drill to 1.7 mm. - Position the holder bar between the fork arms and insert a piece of 1.75 mm filament as axle. You may have to secure the axle to the fork with glue, e.g. with superglue or Revell Contacta PROFESSIONAL. - Enjoy! The bat contour originates from <a href="https://de.vecteezy.com/gratis-vektor/fledermaus">Fledermaus Vektoren von Vecteezy</a> I added the eyes. As always I include the OpenSCAD source code for you to adapt and improve. Visit my other designs at https://www.thingiverse.com/thinger13/designs
Statistics
Likes
0
Downloads
0