Titan Aero Mount for CR-10 V2 or V3 with cable chain
Description
E3D Titan Aero mount for CR-10 V2 or V3. It is compatible with the BLTouch mount position (extended pin 2mm below the nozzle). I printed this with PETG and ABS, both of which worked. I did this upgrade for my CR-10 V3 with a E3D V6 kit (heatblock, throat, nozzle, thermister, and heating element) and a single Aero replacement heat sink. The Aero heat sink works with the Titan in CR-10. The 40 mm CR-10 heatsink fan can be used directly on the Aero heat sink with its original screws. More recently I switched the stepper to an E3D slimline for less weight (this is optional). The other end of the cable chain is from https://www.thingiverse.com/thing:4551763. You only need Control_box_bracket_.stl and 23 pieces of CableChain_link_Cage.stl. The cooling fan I am using is from https://www.thingiverse.com/thing:3364313.
Statistics
Likes
0
Downloads
0