Nerf Gun Pistol
Description
3D printed Nerf Gun. This is heavily inspired by Landru's LF1 - Foam Dart Blaster https://www.thingiverse.com/thing:16726 I used half-length off-brand nerf darts I bought at Walmart, but full-length darts should work fine. I didn't do a whole lot of tolerancing either, so as a preliminary warning, this project will require a lot of sanding on all the moving parts in order to achieve smooth movement. If you have access to a dremel this will make the sanding a lot easier. I also used a soldering iron to get the threaded heat inserts in place as well as the nuts on the right side of the nerf gun body. I was able to achieve >50ft of distance when shooting this nerf blaster horizontally.
Statistics
Likes
0
Downloads
0