Another Ender 3 Pro PSU relocation
Description
This remix introduces following changes to the design: - fan is facing downward, - increased tolerances, - thinner end plates for less filament consumption, - avoided collision of cable shroud with vertical aluminum extrusion, - unfortunately the AC socket only fits mounted with the switch on the bottom. Bolts that you will need: - 4 M5x16 to screw into 40x40 extrusions (aluminum is soft, you don't need to tap it), - 2 M4x10 for attaching psu to the holder (from the back), - 1 M4x6 for attaching psu to the holder (from the top), - rest can be reused from the stock PSu mount. Any filament will do. A big nozzle is recommended.
Statistics
Likes
0
Downloads
0