4 Chamber Split Pour Cup (Vase Mode)
Description
This is a paint/resin/silicone/etc pouring cup with 4 chambers, designed to be printed in vase mode only. I made this to make printing these cups a bit faster and with less filament than you might need with other designs. For correct printing, please use the correct cup for your nozzle size. If scaling up, please scale up your line width as well, or use a cup designed for a smaller nozzle, scaled up to the size of your nozzle. Example: If you want to scale the cup by 150%, and you have a 0.6mm nozzle, pick the 0.4mm cup and scale it up 150%. That will have the proper clearance for that line width.
Statistics
Likes
0
Downloads
0