Automower rear wheel adapter (105, 305, 308)
Description
As I didn't like the original rear wheel of my old automower for the well known reason, I designed a little adapter for a specific wheel (other wheels with an outer diameter of 35 mm might also fit). I chose it, because it's quite wide and has ball bearings. The wheel has the s/n A601.C10.035 and is produced by "BS-Rollen" (I'm sure you'll find it online. At least in Germany, you can quite easily get it in hardware stores, too.) Apart from the wheel, you'll need a hex bolt M10 and a matching locknut. The charging contacts of the automower are about 45 mm above the ground with this wheel installed. Print with the upper side down.
Statistics
Likes
0
Downloads
0