Tastenblock für den Eggbot, Spherobot, Eggduino etc.
Description
Tastengehäuse zum manuellen Steuern von Funktionen am Eggbot: - Druck pausieren, z.b. zum Stiftwechsel etc. kann dann in der Inkscape Eggbot Erweiterung wieder gestartet oder aber mit Homing abgebrochen werden. - Stift heben oder senken, das muss dann nicht mehr in Inkscape gesteuert werden.... - Motoren aktivieren/deaktivieren ist so vorgesehen, funktioniert bei mir leider nicht, vielleicht hat da noch jemand eine Idee ;-) Anschlussbelegung ist auf den Bildern ersichtlich, es wird eine Lochrasterplatine 31x20 mm benötigt und die drei Taster, z.b.6x6 mm Taktile Drucktastenschalter 4-poliger Drucktastenschalter Unterstützung der Tasten muss in der Software für den Arduino aktiviert werden, sonst funktionierts leider nicht. --------------------------------------------------------------- Key housing for manually controlling functions on the Eggbot: - Pause printing, e.g. to change pens etc. can then be started again in the Inkscape Eggbot extension or aborted with homing. - raise or lower pen, You don't have to control it in Inkscape anymore... - Activate/deactivate motors it's intended that way, unfortunately it doesn't work for me, maybe someone else has an idea ;-) Connection assignment can be seen in the pictures, a breadboard 31x20 mm is required and the three buttons, e.g.6x6 mm tactile pushbutton switches 4-pin pushbutton switch Button support must be enabled in the software for the Arduino, otherwise it doesn't work.
Statistics
Likes
0
Downloads
0