Early Mustang Window Roller
Description
This is a 3d printed version of the factory window roller bushing for early Ford Mustangs ('64.5 - '68 and beyond.) The bushing slides onto the studs on the end of the window regulator scissor extension and glide along the window track in order to roll the window up and down. 4 for required for the Driver and Passenger door windows, 3 required for each of the rear quarter windows. Identical to the originals. Why wait weeks for backordered parts when you cant print a replacement at home? Install instructions: - Remove worn/broken window bushing by pulling the spring clip holding the bushing to the scissor extension. - Slide broken/worn bushing out of the window track. Be sure and apply grease or oil to the window track to make for a smoother operation. - Slide the new bushing into the window track and align with the scissor. - Push the stud on the end of the scissor into the bushing and replace the spring clip, ensuring the clip locks into place on the stud groove. - Test the mechanism for proper function. - Track down that piss yellow deuce coupe.
Statistics
Likes
0
Downloads
0