MKomfy 25R sensor attachment fix
Description
This is a spare part that can help you fix broken fixtures on a cooking guard of type MKomfy 25R (https://ctmlyng.com/mkomfy-cooker-guard/). Due to the shape of the snap-on plastic wedges and how they are attached to the back plate, it is difficult to print a replacement that functions the same way and will be strong enough. My approach is to replace the plastic wedges with an extra coin-shaped plate that you glue to the back plate (see picture). The "coin" contains 3 tiny extrusions that will snap into the same nodges that the wedges snapped into. Not a perfect solution, but does the job. Should be self explanatory. I recommend using ABS or PETG and not PLA if you want it to last. Use slow print speeds for higher accuracy. Any remaining wedges must be broken off first before attaching. I used superglue and a pen with ~11mm diameter to help me center the "coin".
Statistics
Likes
0
Downloads
0