Lithophane Support
Description
This is a support I created to print the lithophane pictures vertically. Place the support on the back of the lithophane (the planar surface). Scale up to suit the size of the picture, and place so that the tips of the edge are in contact with the lithophane. NOTE, you need to verify the location with the sliced view of the parts together. The square edge will appear to be in contact, but the slice will round over the edge (see pictures). Once the print is completed, the support should be able to be broken off/snapped off with a minimal mark off on the lithophane. Even if there are a few marks, it generally doesn't impact the quality of the picture.
Statistics
Likes
0
Downloads
0