Cabinet Light Mount w Lock in Place CLIP
Description
I remixed this to add a clip that should be sized to hold most lights and make them quick release if using batteries to change the battery, or to swap out a dead light. It also occurs to me these could be used simply for the switch inside for some other purpose, sort of a more visually appealing limit switch. To insert them, put the light in the outer two holes furthest away from the clip, and tilt it in to the other two for a satisfying click! I also beefed up the screw mounting area. I suggest printing with "lines" as the support shape which will easily break away from the clip and require only a tiny bit of clean up there. Like all functional items, I use Filament Friday Super Ultra Fast profile on my Aquila printer with a line width of .6mm on my .4 nozzle. Two brim lines but might get away with just 1. Great useful design in the original! I wouldn't have been able to use such lights with my different overlay hinges without this!
Statistics
Likes
0
Downloads
0