Anycubic Mega S MKS mini12864v3 housing
Description
This is incomplete because I am waiting for the right screws, brass inserts to arrive. I am not sure if this will work for other mini12864 variants. I saw MKS Tinybee with mini12864 LCD going for less than 35USD and wanted to try this upgrade on my Anycubic Mega S. I have compiled the firmware but have not tested it to be fully working. I am still deciding on how to mount the Tinybee into the printer. I wanted to use https://www.thingiverse.com/thing:4733149 by felixna, but later realised the holes don't match and it is for i3 Mega (LCD cutout is different from Mega S). The cover can be removed from the front with 2 exposed screws so that I can change the color of the cover easier. Things you'll need: 5pcs M3 Hex nut (will be replaced when I get 3mm tall M3 insert nuts) 2pcs M3x14 countersunk screws 2pcs M3 insert nut (I'm currently using 5.7mm tall insert nuts, ordering 3mm ones) Affiliated links: MKS Tinybee and mini12864v3 https://s.click.aliexpress.com/e/_Anj8yD MKS mini12864v3 https://s.click.aliexpress.com/e/_9RQBhn M3 hex nuts https://s.click.aliexpress.com/e/_A3IvJ3 M3 brass inserts https://s.click.aliexpress.com/e/_AXQ1Vf (I ordered these to try) https://s.click.aliexpress.com/e/_AWSAON (better holding torque) M3x14 countersunk screws https://s.click.aliexpress.com/e/_AoMqu1
Statistics
Likes
0
Downloads
0