Onewheel Pint Stand - Three Piece
Description
All the stand designs on here are terribly built, have gaps and spaces in the design and are just too big for a 200mm printer. Designed with the Kush Hi in mind, (so anything smaller will easily fit) the spacing for the board is 70mm at 8 degrees. This should accommodate any Pint setup out there. The triangular leg system ensure plenty of strength. Attach legs with (4) M3x20mm, a finishing screw or drywall screw will work too. I uploaded the cutout and regular versions so you can cut out whatever words you want. Obviously you'll need two legs per stand.
Statistics
Likes
0
Downloads
0