MKS Gen L - Case with cable management room and 80x fan
Description
I had printed a tons of cases and none of them pleased me, various problem were present all the time such: Bad size, bad moving parts/measurements, bad assembly locations, bad cooling or not cooling at all and so on... So i decided to create my own case filling all my problems. This case provides: - Resistance - Rooms for cable management - Perfect moving parts - Freedom to assembly it wherever you want (for 40x v Slot frames) - Good cooling - Enough room for tmc2208 drivers and many others --------------------------------------------- Parts needed: - 80x80 Fan (MKS Gen L can use either 12v or 24v, please refer to the manual) - Some Nuts to assemble the Board and fan, sorry for laziness. --------------------------------------------- You are free to remix it with your owns needs or preferences, i have uploaded the ".blend" archive. The case provides decent ventilation even without a Fan so you can print it with PLA without any problems. In addition to the rooms, there is also a "clawn" near the Board so you may not find any problem managing the cables passing through the Board.
Statistics
Likes
0
Downloads
0