Simple spool for filament (when you have little time to print)
Description
If you don't have a spool and only have 1kg of filament wound, this idea is for you. This spool is made for wound filament with an inner diameter of approximately 86 mm, an outer diameter of approximately 178 mm. The central hole with a diameter of 9 mm is made specifically for a round axis with a diameter of 8 mm. This spool can be printed in about 3.5 hours. For one spool, 2 Easy_print_spool_D_1 central axle parts, 3 Easy_print_spool_D_2 holder parts and 6 3x12 screws are required. Two location files on the gcode printer table are present.
Statistics
Likes
0
Downloads
0