Ikea Expedit / Kallax Shelf System
Description
I wanted to add shelves to my Ikea Kallax, after a lot of looking I designed these. These are two types of pieces. Front/Center (FC) and Back. For each box/cube you need to print 8 FC and 4 Back pieces. Once you get an idea, you can adjust as you need. I have made the files in 2 sizes, Regular and XL Regular - 4mm (max) thickness for shelf - 19 shelf location options XL - 8mm (max) thickness for shelf - 9 shelf location options Shelves - Shelf A - 32.7x38 cm I have included cut files for a few sample shelves; use them at your own risk. I recommend testing the available space carefully before cutting shelf panels. Print Setting Recommendations - No supports - 30% infill Installation - Use a dab of the glue gun or very thin double-sided tape (You don't need it for strength, just to no move) - Start installing from the back and space 12-14 cm between each piece - I have included a spacer to help, but you can use an angle (L) to make sure the install is verticle and not skewed.
Statistics
Likes
0
Downloads
0