Quick Simple Bridge Test
Description
This is a bridge test I created to mess around with the "Enable Bridge Settings" in Cura. All the other tests on here were either too big or not set up so I could see the actual changes in the bridge layers print when changing settings. With a 0.2mm layer height, the 4 bridge STLs will show you exactly what the settings are doing on the 1st, 2nd, and 3rd bridge skin layers so you can tweak your settings. In addition to that, there is a 4th bridge that is 1 layer above the bridge settings so you can see what that looks like also. **Print time:** ~5 min for single bridge and ~15 min for 4 bridge STL
Statistics
Likes
0
Downloads
0