MacBook Pro 13 minimal stand
Description
This is just one more stand, but the looks is minimal, light and areodinamic. The size is adjusted for the MacBook Pro 13. The two ledges on the lower sides are designed to do not protude out from the Mac shape and scratch your hands or arms, and the sides are smotted for this purpose. I printed it selecting 0.2mm layer height with 30% infill using standard PLA. I also inserted a standard 10mm diameter hoose keep the couple together. I cutted the alluminium hoose to 190mm. To print left and right just take the STL part and mirror it using your favourite slicer, it is needed due to the hole which is not through. To insert the alluminium hoose i just put left and right print both on the heated bed of my printer set to 70 Celsius and then push it inside using an hammer on a table, with gentle strokes.
Statistics
Likes
0
Downloads
0