apple_10W_charger_cableorganizer
Description
This cable clip fits perfectly on the apple 10W charger. It works best, if you assemble it like shown on my shared pictures with the nose of the clip slightly behind the rounding of the charger. I tried the clip with both my 3m cable and the original one. Because of the tight fit and the tolerances each printer has, you should test before you print the whole part to spare time and filament. Just turn the part in your slicer upside down and let only about two mm rise above your printer bed. So you can print a little test piece and adjust with your scaling tool if necessary.
Statistics
Likes
0
Downloads
0