eSun spool adaptor for Refilament refills
Description
Clamp to allow an eSun standard spool to be reusable with eSun Re-filament refills. This is an alternative to the Espool, and saves you from throwing away a perfectly good eSun spool that you already have. The adaptor holds the side of the spool securely, and it is durable in the use of bolts rather than a pressure fit or clips. Requires some M5 bolts (15mm or longer) to secure it onto your eSun spool. Updated to require only 2 bolts. Check which side of the spool the adaptor fits best in, and cut off that side with a hacksaw. Mount the adaptor and use a sharp point to mark where the holes should be drilled. Use a 5mm bit to drill 4 holes through the spool. Printed with 3 walls, and 2 top/bottom layers. 0.2mm layer 10% fill (rectilinear fill so that the top layer has a regular pattern to sit on) PLA or PETG Requires 14g of filament with updated 2 bolt version. Post a make if you print one.
Statistics
Likes
0
Downloads
0