FarmBot Gantry Plow
Description
This is a "plow" for the x-gantry of the Farmbot. It protects the wheels from catching on plants that hang over the side of the gantry. The plows mount to the both ends of the gantry mount and use the existing holes and screws - no new hardware needed besides the 3D printed plows. Plow A and Plow B are mirrors of each other, so they can be mounted at each end of the gantry wheel plate (see the attached image) When attaching to the Gantry Wheel Plate, be sure to give 1-2mm of space between the bottom of the plow and the top of the rail. This will allow for free movement, while still pushing plants out of the way.
Statistics
Likes
0
Downloads
0