Haas SL2 Lathe Coolant Adapter
Description
On the Haas SL2 lathe I program and run at work, there's no adapter that goes from a .25 compression fitting to the flexible ball joint coolant spray aimer. I've been using a quarter inch aluminum tube with a compression fitting but over time it gets loose and won't stay aimed where it needs to be. This gizmo screws onto the compression fitting and the flexible coolant part just pops on. I used a 7/16-20 tap to cut the threads in the adapter because I haven't learned how to apply threads to a solid model yet. I don't know why Cura wants to load it upside down, but rotate it so the flat (bottom) is down.
Statistics
Likes
0
Downloads
0