Self Watering Pot
Description
I wasn't really happy with the design of other self watering pots, so I modeled my own version. I changed some of the angles to make it print better without supports, the dimensions a little - now 120mm dia x 180mm tall, and also changed the wall thickness to 3.0mm so I can print with 2x 1.5mm walls. I added more holes to the inside container, and a lip so it sits in the outside pot a bit better. I'm currently using it as a hydro deep water culture bucket. My avocado plant seems to like it, so I'm happy. I've included the .STL if you just want to print, and also the .stp / .f3d (fusion 360) file in case you're like me and want to tweak it a bit. The fusion 360 file is a bit messy and has some extra geometry as I iterated the design, but you should be able to mod it without too much trouble. I also had a few pin-hole leaks that I had to use a bit of superglue on, but think that's due to my printer not necessarily the design.
Statistics
Likes
0
Downloads
0