Laserparametertest for Snapmaker an other lasers
Description
This is a gcode-file which is burning several filled rectangles on your material. I choosed to go from 10 to 100% in ten steps and for the speed I started from 300mm/min up to 3300mm/min in three hundred steps. Be careful, some materials will burn away with the 10W-Lasermodule! The projectfile can be edited in Luban and the gcode should work right without adjustments on a Snapmaker A350. I also added the 110 .json-files if you want to make your own set of settings.
Statistics
Likes
0
Downloads
0