BigTreeTech SKR Mini V1.1 Case
Description
This is a case / enclosure for the BigTreeTech SKR Mini V1.1 and any other BTT SKR Mini Motherboards. Using this with a BTT Touch-Screen is mandatory, as the USB-Port and SD-Card slots are covered up. I used the BTT TFT24 and BTT TFT35 for this. There are 4 mounting holes on the top part for a chip cooling solution. I reccommend a Noctua A4x10 as they are quiet and pump a hole lot of air into the case. The two parts of this enclosure are easily separatable when printed with PETG or ABS. No screws needed. When installing the MB on the bottom part, use silicon spacers (typically used for FPV drone building)
Statistics
Likes
0
Downloads
0